You wont find another one available!

If you're serious about racing you need this!

3D printed brake ducting tube to route your brake ducting to the back side of the disc.

If you've ever tried to duct your brakes you'll know how tight it is. For the most efficient brake cooling you want to feed cool air directly to the middle of your brake rotor/disc. conventionally this is very tricky as there is little to no room to fit the flexible brake hose behind the strut without kinking or rubbing on suspension.

using 3D scanning and CAD design these have been designed to fit perfectly, and feed air around the back of the strut straight to the back of the rotor/disc. 

ample clearance for the tyre at full lock.

Features:

• 3d printed from high temp carbon fiber infused ASA
• 2mm wall thickness for strength and durability
• made to fit 2.5" brake ducting hose
• duct air from the bumper to the back of the rotor/disc
• made to fit with 17" wheels
• cad designed using 3d scanning for perfect fitment

NOTE: these will only work with wheels 17" and above. may fit smaller wheels if you have less suspension droop.

Made to order please allow up to 1 week for production.